Back To The Future Part III WHDLoad Pack

README
 Short:	 	HD Installer for Back to the Future III v1.3
 Author:	Keith Krellwitz (kkrellwi@gmail.com)
 Uploader:	Keith Krellwitz (kkrellwi@gmail.com)
 Type:	 	game/patch

 THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY OF ANY KIND, EITHER EXPRESS OR
 IMPLIED, STATUTORY OR OTHERWISE. THE ENTIRE RISK AS TO USE, RESULTS AND
 PERFORMANCE OF THE PACKAGE IS ASSUMED BY YOU AND IF THE PACKAGE SHOULD PROVE
 TO BE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
 REPAIR OR OTHER REMEDIATION.
 UNDER NO CIRCUMSTANCES, CAN THE AUTHOR BE HELD RESPONSIBLE FOR ANY DAMAGE
 CAUSED IN ANY USUAL, SPECIAL, OR ACCIDENTAL WAY, ALSO IF THE OWNER OR A THIRD
 PARTY HAS BEEN POINTED AT SUCH POSSIBILITIES OF DAMAGE.

 This install applies to "Back to the Future III" © 1991 Image Works/Konami.

 Requirements:
 -------------
 The install requires WHDLoad and RAWDIC to be in the path. Both can be found
 in the WHDLoad package.
 To install from a different drive than DF0: select installation mode Expert.
 
 The installed program requires 0.5 MB ChipMem (+1.4Mb other memory for preload 
 option).
 
 It can be quit by pressing F10 (key can be changed with Tooltype "QuitKey=").
 
 The installed program requires WHDLoad 10+


 Thanks to Chris Vella for the working Konami version.  Thanks also go to
 Steven Becker for the Konami version.
 
 NEEDS TO BE RE-INSTALLED!!!!!!!!!!!!!!

 The previous version had a bug in the imager, which cut the 2nd disk 
 short by one track.  When you finished the game you were presented with a
 "DOS-Error @219 (seek failure) on reading "Disk.2".  After the re-install
 you will be able to see the ending.

 Features:
 ---------
 - Three versions supported
 - Full loading of the game from HD
 - Convenient installer script
 - Possible quit with  key
 - Fixed access fault in level 1
 - Custom1=1 for infinite time on the Train level

 History:
 --------
 version 1.2 (03-01-2002) done by Keith Krellwitz (Abaddon):
 - initial WHDLoad version
 - Two versions supported
 - fixed access fault in 1st level.
 
 version 1.3 (08-28-2010) done by Keith Krellwitz (Abaddon):
 - Complete re-write (removed jst macros and implemented PATCHLIST)
 - Fixed imager (Requires Re-Install)
 - Fixed quit issue (didn't always quit)
 - Added a support for another Image Works version. Only the Pie Throwing
   level is different.
 - Patched missed blitter routines
 - Removed remaining disk initialization from each level 
 - Custom1=1 for infinite time on the Train level
 - Included Manual from www.lemonamiga.com
 - Source Included

 
CHEAT MODE:
To get infinite lives, type these in during the story before each
level.

                   LEVEL 1__________"ROTTEN CHEAT".
                   LEVEL 2___________"LOUSY CHEAT".
                   LEVEL 3________"LOW DOWN CHEAT".



 Contact:
 --------
 If you have problems with this installation please try and get a newer
 version of this package from the WHDLoad WWW-Page. If that doesn't help try
 some Tooltypes like NOCACHE, NOAUTOVEC, EXPCHIP, NOMMU, PAL or NTSC. If
 that also fails, please inform the author via the Bug-Report-Form which
 can be accessed on the WHDLoad WWW-Page.

 For the full WHDLoad package, other installs and updates refer to:
	http://www.whdload.de/
 or	aminet:dev/misc/whdload#?
 and	aminet:game/patch/