Alfred Chicken WHDLoad Pack

README

 THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY OF ANY KIND, EITHER EXPRESS OR
 IMPLIED, STATUTORY OR OTHERWISE. THE ENTIRE RISK AS TO USE, RESULTS AND
 PERFORMANCE OF THE PACKAGE IS ASSUMED BY YOU AND IF THE PACKAGE SHOULD PROVE
 TO BE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
 REPAIR OR OTHER REMEDIATION.
 UNDER NO CIRCUMSTANCES, CAN THE AUTHOR BE HELD RESPONSIBLE FOR ANY DAMAGE
 CAUSED IN ANY USUAL, SPECIAL, OR ACCIDENTAL WAY, ALSO IF THE OWNER OR A THIRD
 PARTY HAS BEEN POINTED AT SUCH POSSIBILITIES OF DAMAGE.

 This install applies to "Alfred Chicken AGA/CD32" © 1993 Mindscape.

 Requirements:
 -------------
 This install requires WHDLoad to be in the path.
 This program can be found in the WHDLoad package.
 To install from a different drive than DF0: select installation mode Expert.

 The installed game requires 1.5 MB ChipMem.
 (+1.7 MB for preload and Kickstart ROM)
 It can be quit by pressing F10 (key can be changed with Tooltype "QuitKey=").

 The game requires an installed A600/A1200/A4000 Kickstart 3.1 image.
 The kickstart image must be located in the directory "Devs:Kickstarts" and
 must be named "kick40063.A600", "kick40068.A1200" or "kick40068.A4000". The
 image can be extracted from a A600/A1200/A4000 with tools like 'GrabKick' or
 similar which can be found on aminet.
 If the image is of wrong version or altered in any way WHDLoad will quit with
 an appropriate message.
 Additionally the file "kick40063.A600.RTB", "kick40068.A1200.RTB" or
 "kick40068.A4000.RTB" must be installed in the same directory as the kickstart
 image. It can be found in the archive "util/boot/skick346.lha" on aminet.


 Features:
 ---------
 - Full load from HD
 - AGA and CD32 versions supported
 - DMA wait in replayers fixed (x2)
 - Copperlist termination fixed (x3)
 - Decrunchers (Pro-Pack, FIRE) relocated to fast memory
 - Intro can be skipped with CUSTOM1
 - Unlimited lives trainer can be enabled with CUSTOM2
 - Unlimited time trainer can be enabled with CUSTOM3
 - Starting level can be selected with CUSTOM4
 - NewIcon (created by me)
 - Source code included as usual
 - Quit option that works on 68000 machines (default key is 'F10')


 Here's the patch for the AGA/CD32 version of Alfred Chicken which
 I made this morning at work. When I came back home I added some
 trainers and finished the patch. Available trainers are unlimited
 lives (CUSTOM2=1) and unlimited time (CUSTOM3=1). The starting
 level can be selected with CUSTOM4. I may add more trainers in
 a later version of the patch.



 Update 16-May-2013
 ------------------

 I got a few bug reports which mentioned an access fault when starting
 the game. Turned out the version of ASM-Pro I used to assemble
 the final slave didn't assemble a certain 68020 instruction correctly
 while the ASM-One version I used on my A4060 while developing the
 patch had no problems with it. Since I checked the patch on my
 A4060 I didn't think there would be any problems. So much for the
 theory... Anyway, this is now fixed, one more reason to maybe finally
 start coding a new AsmOne/Pro version from scratch. ;)

 I have also changed the aproach for the starting level selection,
 it is now possible to select level 11 as starting level too.

 Have fun with this cute platform game!
 Sting, 16-May-2013


 Greetings to all in Scarab and Scoopex, the WHDLoad team, PMC,
 Musashi5150, Skan, Slummy, Loaderror, Frequent, Wayne Kerr, Mr.Spiv,
 Alpha One, CFou!, Paradroid and all the other usual suspects. :)

 Special greetings to all Golf MK1 fans worldwide except those
 lowlifes who "borrowed" my MK1 for a joyride!

 Extra greetings to the usual suspects on #amigascne, see you all at
 Revision 2014! :)



 History:
 --------
 
 version 1.01 (16.05.2013) done by StingRay:
 - Access fault caused by a bug in AsmPro fixed, thanks to Wepl, aPEX
   and Ville Haapanen (Mantis issues #2746 & #2750)
 - level selection allows to select level 11 as starting stage now

 version 1.00 (08.05.2013) done by StingRay:
 - initial release
 - supports AGA (SPS 623) and CD32 version
 - source code included



 Contact:
 --------
 If you have problems with this installation please try and get a newer
 version of this package from the WHDLoad WWW-Page. If that doesn't help try
 some Tooltypes like NOCACHE, NOAUTOVEC, EXPCHIP, NOMMU, PAL or NTSC. If
 that also fails, please inform the author via the Bug-Report-Form which
 can be accessed on the WHDLoad WWW-Page.

 For the full WHDLoad package, other installs and updates refer to:
	http://www.whdload.de/
 or	aminet:dev/misc/whdload#?
 and	aminet:game/patch/