Humans 2, The: Jurassic Levels WHDLoad Pack

README

 THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY OF ANY KIND, EITHER EXPRESS OR
 IMPLIED, STATUTORY OR OTHERWISE. THE ENTIRE RISK AS TO USE, RESULTS AND
 PERFORMANCE OF THE PACKAGE IS ASSUMED BY YOU AND IF THE PACKAGE SHOULD PROVE
 TO BE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
 REPAIR OR OTHER REMEDIATION.
 UNDER NO CIRCUMSTANCES, CAN THE AUTHOR BE HELD RESPONSIBLE FOR ANY DAMAGE
 CAUSED IN ANY USUAL, SPECIAL, OR ACCIDENTAL WAY, ALSO IF THE OWNER OR A THIRD
 PARTY HAS BEEN POINTED AT SUCH POSSIBILITIES OF DAMAGE.

 This install applies to "The Humans" & "Human Race - Jurassic Levels" © 1992 Imagitec Design.

 Floppy version:

 This install requires WHDLoad and RawDIC to be in the path. Both can be found
 in the WHDLoad package.
 To install from a different drive than DF0: select installation mode Expert.

 The installed program requires 1.0 MB ChipMem and 0.5 MB OtherMem.
 It can be quit by pressing '*' (key can be changed with Tooltype "QuitKey=").

 CD³² version:

 - requires 2.0 MB ChipMem and 0.5 MB OtherMem.
 - It can be quit by pressing num '*' (key can be changed with Tooltype "QuitKey=").
 - The game requires an installed A1200 or A4000 Kickstart 3.1 image.
   The kickstart image must be located in the directory "Devs:Kickstarts" and
   must be named "kick40068.A1200" (resp kick40068.A4000). 
   The image can be extracted from a A1200 (resp A4000) with tools like 'GrabKick'
   or similar which can be found on aminet.
   If the image is of wrong version or altered in any way WHDLoad will quit with
   an appropriate requester.
   Additionally the file "kick40068.A1200.RTB" (resp "kick40068.A4000.RTB")
   must be installed in the same directory as the kickstart image.
   It can be found in the archive "util/boot/skick346.lha" on aminet.


 If you have problems with this installation please try and get a newer
 version of this package from the WHDLoad WWW-Page. If that doesn't help try
 some Tooltypes like NOCACHE, NOAUTOVEC, NOVBRMOVE, NOMMU, PAL or NTSC. If
 that also fails, please inform the author via the Bug-Report-Form which
 can be accessed on the WHDLoad WWW-Page.

 For the full WHDLoad package, other installs and updates refer to:
	http://www.whdload.de/
 or	aminet:dev/misc/whdload#?
 and	aminet:game/patch/

 version 1.6-B
 - floppy version: fixed keyboard issues due to quit key implementation (issue #003446)

 version 1.6 (10.06.2016) done by JOTD
 - fixed issues #0001160 and #0003187 => slave works again on 68000 machines
 - quit key works on 68000/NOVBRMOVE (not during intro)

 version 1.5 (10.12.05) done by JOTD
 - Jurassic Levels supported (DE & UK), which adds up to 7 versions supported

 version 1.4 (26.11.05) done by JOTD
 - 2 other versions supported (including Jurassic Levels)

 version 1.3 (05.03.05) done by JOTD:
 - CD³² version supported (Humans 1 & 2):
     * gfx errors fixed (blitter waits)
     * intro fixed (by rebooting just after it because of memory problem)
     * CUSTOM1=1 skips introduction

 version 1.2 (01.01.05) done by JOTD:
 - french version supported
 - install script rewritten
 - source code fully reworked
 - icons added (by Frank & Exoticon)
 - manual included
 - source code included

 version 1.1 (01.04.01) done by Mr.Larmer:
 - english version supported too

 version 1.0 (14.03.01) done by Mr.Larmer:
 - german version supported only
 - manual protection removed for registered users only
 - Atari ST code removed
 - stack frame format fixed
 - copperlist bug removed

 to do:
 - fix the problem to make the game work with fast memory