Super Cauldron WHDLoad Pack

README

 THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY OF ANY KIND, EITHER EXPRESS OR
 IMPLIED, STATUTORY OR OTHERWISE. THE ENTIRE RISK AS TO USE, RESULTS AND
 PERFORMANCE OF THE PACKAGE IS ASSUMED BY YOU AND IF THE PACKAGE SHOULD PROVE
 TO BE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
 REPAIR OR OTHER REMEDIATION.
 UNDER NO CIRCUMSTANCES, CAN THE AUTHOR BE HELD RESPONSIBLE FOR ANY DAMAGE
 CAUSED IN ANY USUAL, SPECIAL, OR ACCIDENTAL WAY, ALSO IF THE OWNER OR A THIRD
 PARTY HAS BEEN POINTED AT SUCH POSSIBILITIES OF DAMAGE.

 This install applies to "Super Cauldron" © 1993 Titus.

 This install requires WHDLoad and DIC to be in the path. Both can be found in
 the WHDLoad package.
 To install from a different drive than DF0: select installation mode Expert.

 The installed program requires 0.5 MB ChipMem and 1.5 MB OtherMem.
 It can be quit by pressing F10 (key can be changed with Tooltype "QuitKey=").

 If you have problems with this installation please try and get a newer
 version of this package from the WHDLoad WWW-Page. If that doesn't help try
 some Tooltypes like NOCACHE, NOAUTOVEC, NOVBRMOVE, NOMMU, PAL or NTSC. If
 that also fails, please inform the author via the Bug-Report-Form which
 can be accessed on the WHDLoad WWW-Page.

 For the full WHDLoad package, other installs and updates refer to:
   http://www.whdload.de/
 or   aminet:dev/misc/whdload#?
 and  aminet:game/patch/

 version 1.2 (24.04.20) done by CFou!
 - source code adapted for WHDLoad 17+
 - trainer enhanced using CUSTOM tooltype (keyboard trainer removed)
     CUSTOM1=1 : Unlimited lives
     CUSTOM1=2 : Unlimited energy
     CUSTOM1=4 : Unlimited spell	
     CUSTOM1=8: HELP key to have bloom
     CUSTOM1=16: DEL key to have all speels
     CUSTOM2=x : (x=1 to 5) to select start level
     (several option can be cumulated by example CUSTOM1=5 for lives & spells)	
 - CUSTOM3=1 to enable Second Button/CD32Pad support
	Blue / Second button : Jump
	PLAY button / P key  : Pause 
	Yellow / Red button  : Enter/Leave inventory 
 - CUSTOM4=1 instead of CUSTOM1=1 used to remove blitter waits insertions
 - Manual included

 version 1.1 (27.05.06) done by CFou!
 - Slave rewritten & source code included
 - OSEmu not needed
 - Several another blitter delays inserted (to fix gfx bugs on 68040)
 - Custom1=1 used to remove some blitter delays (on slow cpu)
   	You can use 'cache' on 68040+ if game speed slow down
	You can use 'CUSTOM3=1' on other cpu if game speed slow down
 - Tested on 68060 with 'Cache' tooltype
 - New install script

 version 1.0 (13.09.01) done by CFou!
 - initial release
   - 2 versions supported:
      original version with Crasy cars III demo (2 disks)
         => install script does a copy of "Cauldron:1" file
            and make an image of disk2 named "Disk.1"
   - OSEmu from Harry used
   - Track disk protection removed
   - Fixed with SNOOPECS Tooltype
   - Many blitter delays inserted
   - C-Fou's keyboard trainer added
         F1-F5 To select start level (F5: outro)
         Del/help: active Unlimited Energy and lives
   - colored icon included

Thanks to Tony Aksnes for the original disk images 

Remark:	With CD32Pad support JoyUp is not desabled because some game parts
	need to jump and fire in same time.
        Without JoyUp and only second button to jump, it is unplable...

Known bug: When you enter in inventory using Yellow button, If you press
	Yellow button again you can leave inventory and you can see player 
	sprite appears breifly.
	So you must use RED button to leave inventory!